#PE DESIGN 10 SAVED FILES DO NOT SHOW UP PRO#
#PE DESIGN 10 SAVED FILES DO NOT SHOW UP SOFTWARE#

#PE DESIGN 10 SAVED FILES DO NOT SHOW UP SOFTWARE#

If the software will open it, your machine will too. It would have been a separate CD/DVD in your packaging when you unpacked your machine out of the box? If you did, I suggest that you look at designs you want to stitch out in that software. I'm here to tell you that 200,000 stitches will take hours to sew out, so BIG isn't always more fun, even if it is pretty.Дid you get software with your machine, something like 'AcuTools' or an Editor. I think that the 500E limit is 200,000 (I said 100,000 in the previous, but I was in former technology mode). If that is the case, go down the colour list and save a certain portion as one file and see how large that is in stitches. Everything looks good in realistic mode, and all logo boards are inside the editing area. Specify a location where you want to save the drawing file, and then click Save. In the Save As dialog box, click XML Drawing (.vdx) in the Save as type box, and then type a file name in the File name box. I have created the logo using the wizard. To do this: Start Visio, and then open your drawing. If they are to large the machine just can't read them. PE-Design logo wont save I am using a trial version of PE-Design to create a PES logo for my Brother embroidery machine. The designs you want to test should fit in those hoops, but they must be the correct format - JEF is the preferred format of Janome machines, however, they must also be saved within the hoop size, and be the correct stitch size as well. I know that you have some or all of the following hoops listed in metric as that is the name of those hoops 140 X 200 (or 5X7), 200 X200 (about 7.9X7.9) 200 X 280 ( 7.9 X less than 11'). You need to save the designs in the proper hoop size for your 500E - we do not have some of the ones you listed, but we do have ones that those files will fit into. RE: Can't get my file to transfer to my 500e jef and can't get that one to work either.ДЄny thoughts on what might be causing this?

#PE DESIGN 10 SAVED FILES DO NOT SHOW UP PRO#

To top it off I did a little saying in Sew What Pro and also saved that as a. I turned the machine off for a few hours- that did not help. I tried a different USB stick- that did not help. I had the designer resend the files- that did not help I dumped the initial download and redownloaded all the designs (since they were sent in separate files- not all in a zipped folder). I tried to resize those 2 incase they were too big for the hoop (which they shouldn't be according to the actual design size). I can see the 5x7 but not the other 2 files. I have all the files in the same place on the flash drive. The 6x10 and 7x11 are not being recognized by the machine at all. She sent me the design in 3 sizes (5x7, 6x10, 7x11) in. I am test stitching a design for an embroidery designer.

Pe design 10 saved files do not show up